Products

Plug-in Tools

Swap the tool tip to match the job: micro-grippers, tweezers, rotary tips, soldering, gas and liquid injection, and force-measurement systems.

SEM image of the MGS2 micro-gripper approaching a cluster of microspheres, 5 µm scale bar.
MGS2

Micro Gripper MGS2

A two-jaw micro-gripper that picks up, holds and repositions micro-objects inside the electron microscope.

View product
The FMS-EM force-measurement plug-in on a Kleindiek MM3A-EM micromanipulator, its silicon force sensor visible as a small gold chip at the tip, fed by a fine cable.
FMS-EM

Force Measurement System FMS

Laser-free force measurement and nanoindentation in the SEM — resolve forces to 10 nN and identify materials by their resonance.

View product
The MTW-EM microtweezer plug-in on a Kleindiek micromanipulator, ending in fine piezo-driven gripper jaws.
MTW-EM

Microtweezer MTW

A piezo-driven microtweezer for pick-and-place — one jaw fixed, one jaw stepping in 0.25 nm increments across a 3 mm span.

View product
The RoTip rotational-axis plug-in on a Kleindiek micromanipulator, its cylindrical axis holding a long tungsten probe tip.
RoTip-EM

RoTip

A rotational-axis plug-in that adds a fourth degree of freedom — continuous 0.1° rotation for true FIB lathe milling, tomography and STEM.

View product
The LCMK-EM low-noise probe-tip holder on a Kleindiek MM3A-EM micromanipulator, with shielded triax cabling running to a fine tungsten probe tip.
LCMK-EM

Probe-Tip Holder LCMK

A low-noise, low-resistance probe-tip holder that turns a Kleindiek manipulator into a precision nanoprober — resolving currents down to 3 fA.

View product
The GIS-EM gas-injection plug-in on a Kleindiek micromanipulator, showing the heated precursor reservoir, fine heater wiring and the injection needle.
GIS-EM

Gas Injection System GIS

A gas-injection plug-in that meters precursors and gases into the SEM chamber in precise doses, through a proportional valve driven by a Nanomotor®.

View product
The MIS-EM microinjection plug-in on a Kleindiek MM3A-EM micromanipulator, its micro-valve fed by inlet tubing and ending in a fine glass injection pipette.
MIS-EM

Microinjection System MIS

A micro-valve plug-in for precise microinjection of liquids onto samples in the low-vacuum SEM, down to roughly 100 µm droplets.

View product
The MSU micro-soldering plug-in on a Kleindiek MM3A-EM micromanipulator, its heated tip wound with fine copper heating wire.
MSU-EM

Micro Soldering Unit MSU

A miniaturized, closed-loop soldering iron for the SEM — set a tip temperature and hold it, in air or in vacuum, for micro-scale joining.

View product
Get in touch

Talk to an application engineer

Tell us your sample and your microscope — we’ll walk you through the workflow and route you to the right regional team.

Get in touch